How to Check if Liquidity Is Locked on DEX Screener

Check if a Solana token's liquidity is locked or burned: what DEX Screener shows, how to confirm on Solscan, Raydium Fee Keys and Meteora locks.

By Solana Token Creator ·

"Is the liquidity locked?" is one of the first questions asked about any new Solana token, and most people try to answer it on DEX Screener. This guide shows how to check if liquidity is locked on DEX Screener, why that view is only a starting point, and how to confirm a lock or burn yourself on Solscan in a few minutes. It is written for buyers, and for creators who used our tool to lock or burn your LP and want the proof to be easy to find.

What "locked" and "burned" mean on Solana

When someone adds liquidity to a pool, they get a receipt for their share: fungible LP tokens on pools like Raydium CPMM, or a position (held through an NFT) on Raydium CLMM and Meteora DAMM v2. Whoever holds that receipt can withdraw the liquidity. So the question "is liquidity locked" really means: can the people holding the receipts pull the SOL out of the pool?

  • Burned: the LP tokens were destroyed. The liquidity they represented stays in the pool, and nobody can ever withdraw it.
  • Locked, permanently: the LP tokens or the position were placed in a lock that has no unlock. Raydium's Burn & Earn and Meteora's permanent lock work this way. The liquidity stays, and the owner can still claim trading fees.
  • Locked, for a time: some third-party lockers hold LP tokens until a date and then release them. After that date the liquidity is withdrawable again.
  • Unlocked: the receipt sits in an ordinary wallet, usually the creator's, and can be withdrawn with one transaction.

If you are deciding which to do as a creator, our post on whether to lock or burn covers the trade off. This one is about checking.

How to check if liquidity is locked on DEX Screener

  1. Search DEX Screener for the token's mint address, not its name or ticker.
  2. Open the pair you care about. A token can have several pools, and each has its own liquidity and its own lock status.
  3. Look at the pair's liquidity figure and at any lock or security information shown on the pair page, including linked audit and checker data.
  4. Copy the pair (pool) address from the page. You need it for the on-chain check below.

Many guides describe a padlock or a locked share shown next to the liquidity. Treat it as a hint, not proof. DEX Screener's public documentation does not explain how a lock is detected, which lockers it recognises, whether burned and locked LP are told apart, or how quickly it updates after a new lock. Third-party guides disagree on all four. A missing badge does not mean the liquidity is unlocked, and a badge does not tell you whether a lock is permanent or ends next week.

The data that decides the question is on-chain, so the reliable check is on an explorer.

One more thing worth checking on the same page: the token's own authorities. Locked liquidity means little if the creator can still mint new tokens into it. Tokens made with the Solana token creator can have mint and freeze authority revoked at creation, and any explorer shows whether they were.

Check it on-chain with Solscan

How you check depends on how the pool hands out receipts. Start by opening the pool address on Solscan or on the DEX's own page to see which program it belongs to.

Pools with LP tokens (Raydium CPMM and AMM v4)

  1. Find the pool's LP mint. The pool account stores it, and the pool creation transaction shows it being created.
  2. Open the LP mint on Solscan. The token page shows its current supply, and the Holders tab lists every account holding it with its share of the supply.
  3. Read the holders. A share held by an account that Raydium's lock program, LockrWmn6K5twhz3y9w1dQERbmgSaRkfnTeTKbpofwE, controls, or by a known locker, is locked. A share in an ordinary wallet is not.
  4. Look for burns. Burning LP tokens reduces the LP mint's supply, so the burned share no longer appears among the holders at all. Withdrawing liquidity also burns LP tokens, though, so a lower supply alone proves nothing: open the transaction and check it was a plain burn that returned no tokens to anyone.

So "100% burned" on a CPMM pool means the LP tokens the creator received were destroyed. Any LP tokens left in circulation belong to someone else, and their holders can still withdraw that part.

Pools with positions (Raydium CLMM and Meteora DAMM v2)

These pools have no LP token to burn, so "burned" does not apply. Liquidity is either in a position its owner can withdraw from, or in a locked position:

  • Raydium CLMM: a Burn & Earn lock moves the position into Raydium's lock program, the same LockrWmn6K5twhz3y9w1dQERbmgSaRkfnTeTKbpofwE. The transaction calls that program.
  • Meteora DAMM v2: a permanent lock is an instruction to the DAMM v2 program, cpamdpZCGKUy5JxQXB4dcpGPiikHawvSWAd6mEn1sGG. The position stays in the owner's wallet, but its liquidity is recorded as permanently locked: it cannot be withdrawn and still earns fees.

Raydium Burn & Earn and the Fee Key NFT

Raydium describes Burn & Earn as a way to permanently lock a CPMM or CLMM position while keeping the right to claim its trading fees. The liquidity sits in a program-owned escrow and can never be withdrawn. In return, the locker's wallet receives a newly minted Raydium Fee Key NFT, which carries the right to collect the fees from that locked position.

For a buyer, that gives two clean checks:

  • the lock transaction calls Raydium's lock program; and
  • the creator's wallet holds a Raydium Fee Key NFT instead of the LP tokens or the position.

The Fee Key can be transferred, but it only moves the right to fees. It never gives the liquidity back. Raydium AMM v4 pools are not supported by Burn & Earn, so their LP can only be burned, not locked there.

What rug checkers show

Rug checkers read the same on-chain data and summarise it. RugCheck, for example, reports each market's locked LP share and its LP supply now against the original supply, and lists the lockers holding LP. That is quicker than reading holders by hand. Remember that the gap between original and current LP supply covers withdrawals as well as burns, so it is a prompt to look at the transactions, not a verdict on its own.

Checkers can still lag behind a brand new pool or miss an unfamiliar locker. When a score and the explorer disagree, the explorer wins. Our rug check guide covers the rest of the report.

Can locked liquidity still be removed?

The locked or burned part cannot, ever, with Raydium's Burn & Earn, Meteora's permanent lock or a burn. Everything else can, so look at the whole pool, not one badge:

  • Partial locks. A creator can lock 50% and keep the rest. Check the share, not just the word "locked".
  • Time locks. A lock with an end date releases the liquidity when it ends. Find the unlock date before you rely on it.
  • Other pools. The token may trade in a second pool whose liquidity is not locked at all.
  • New deposits. Anyone who adds liquidity after the lock gets their own receipt, which is not locked.

And a full lock only protects the pool. It says nothing about large holders selling their tokens into it, which is why rug checkers also look at holder concentration and the token's authorities.

Burned or locked: which is safer for buyers?

For the liquidity itself, the two are equally final: a burn and a permanent lock both make the creator's share impossible to withdraw. The difference is who keeps the trading fees. With a burn, nobody does; with a lock, the creator still earns them. Some buyers prefer a burn because it looks absolute, but a permanent lock through Raydium or Meteora gives them the same guarantee. A time lock is weaker than either, because it ends.

For creators: make your lock easy to verify

If you locked or burned with our tools, you already have the best proof there is: the transaction. A few habits make it easy for buyers to find:

  1. Copy the transaction link from the success screen and post it with the token's mint address, in your pinned message and on your site.
  2. Say which pool and which share: "100% of the Raydium CPMM LP burned" or "Meteora DAMM v2 position permanently locked". Precise claims read as honest.
  3. Lock or burn before you promote the token. The pool creator can lock the LP in the same step as the pool, at no extra fee from us, so the lock is in place from launch rather than added later.
  4. For an existing pool, use Burn LP Tokens: lock or burn on a Raydium CPMM pool, burn on Raydium AMM v4, lock a Raydium CLMM or Meteora DAMM v2 position. It costs 0.05 SOL plus network fees.
  5. Give indexers a little time. Explorers show the transaction at once; third-party pages may take longer to pick up a new lock.

Buyers will also run your token through a checker, so it helps to know what they see. Our guide on token authorities covers the other half of that score.

Frequently asked questions

How do I know if liquidity is locked?

Open the pool's LP mint or position on Solscan and see who holds it: a lock program, a burn, or an ordinary wallet. DEX Screener and rug checkers are useful shortcuts, but the explorer is the source.

What does the lock icon on DEX Screener mean?

Guides describe it as a sign that lock or burn data was found for that pair. DEX Screener does not document how it is computed, so confirm the share and whether the lock is permanent on-chain.

Can locked liquidity still be removed?

Not the permanently locked or burned part. A time lock releases at its end date, and any unlocked share or other pool can be withdrawn as normal.

Does locked liquidity mean a token is safe?

No. It removes one risk, the pool being emptied. Price can still fall, and holders can still sell. Nothing here is financial advice.

Ready to use the Burn LP Tokens?

Connect your wallet, fill in the form and review every value and fee before you sign.