What Is Token Supply and Token Decimal on Solana?
Token supply and decimals on Solana in plain words: raw vs displayed amounts, 6 vs 9 decimals, the maximum supply, lamports to SOL and how to choose.
By Solana Token Creator ·
Two numbers on the token form confuse more people than any other: supply and decimals. So what is token supply and token decimal, exactly? Supply is how many tokens exist. Decimals decide how finely each one can be split. Both are written into the token's mint account when it is created, and decimals can never change afterwards. This guide explains both in plain words, with the real limits Solana enforces, so you can set supply and decimals in the Solana token creator without guessing.
The short answer
- Supply is the number of whole tokens in existence, for example 1,000,000,000.
- Decimals is how many places after the decimal point a balance can have. With 9 decimals the smallest amount anyone can hold is 0.000000001 of a token.
- 9 decimals, the same as SOL, is a common default. USDC uses 6, and so does every token launched on pump.fun. Anything from 0 upward works, and our creator accepts 0 to 18.
- Supply multiplied by ten to the power of the decimals has to fit in a 64-bit number, so very large supplies need fewer decimals.
What is token supply?
Supply is the total number of tokens that exist right now. On Solana the mint account keeps a running total: every time tokens are minted the total goes up, and every time someone burns tokens it goes down. There is no separate "max supply" field on a classic SPL token. The ceiling is whatever the mint authority decides, and once that authority is revoked, the current total is the ceiling for good.
That is why the supply you type into a creator matters. Our tool mints the whole amount to your wallet in the same transaction that creates the token. If you also revoke mint authority at that moment, the number you typed is the supply forever: nobody can add a single token, and it can only shrink if holders burn some.
What is a token decimal?
Solana does not store fractions. Every balance is a whole number of the token's smallest unit, sometimes called its base unit. The decimals setting tells wallets and explorers where to put the decimal point when they show that whole number to people.
Take a token with 6 decimals. A wallet that holds 2,500,000 base units shows a balance of 2.5 tokens, because it moves the point six places to the left. With 9 decimals the same balance of 2.5 tokens is stored as 2,500,000,000 base units. Nothing about the token's value changes; only how finely it can be divided.
Raw amount vs displayed amount
Developers call these two views the raw amount and the UI amount. When you ask a Solana node for a token's supply, it answers with both: the raw integer as a string, the decimals, and the human-readable figure already divided out. Wallets, DEX pages and explorers show the human figure. Programs, transactions and most APIs work in raw units.
Mixing the two is the classic mistake. Send 1,000 raw units of a 9-decimal token and the receiver sees 0.000001 tokens. Type 1,000 into a form that expects raw units and you mint a dust amount instead of a thousand tokens. Our creator asks for whole tokens and does the conversion for you: it multiplies your supply by ten to the power of your decimals before it builds the mint instruction.
SOL to lamports: the same idea for SOL itself
SOL is the best example of decimals at work. Its smallest unit is the lamport, and SOL has 9 decimals, so one SOL is 1,000,000,000 lamports. Every fee, rent deposit and balance on the network is really a count of lamports.
| SOL | Lamports | Where you see it |
|---|---|---|
| 1 SOL | 1,000,000,000 | One whole SOL |
| 0.1 SOL | 100,000,000 | A tenth of a SOL |
| 0.001 SOL | 1,000,000 | A thousandth of a SOL |
| 0.000005 SOL | 5,000 | The base fee for one signature |
| 0.000000001 SOL | 1 | The smallest amount that exists |
To convert lamports to SOL, divide by one billion. To go from SOL to lamports, multiply by one billion. Your token works exactly the same way with its own decimals in place of the nine.
How many decimals should a Solana token have?
For almost every project the answer is 9, and that is the default in our form. It matches SOL, so amounts line up with what traders are used to, and it leaves plenty of room to split tokens when the price per token is high. The other common choice is 6, which stablecoins such as USDC use, as do the many meme coins launched on pump.fun.
6 vs 9 decimals
The practical difference is the maximum supply, covered below, and nothing else. Wallets, DEXes and aggregators handle both without trouble. Pick 6 if you want a supply above about 18.4 billion tokens, since 9 decimals cannot hold that much. Pick 9 otherwise.
When does 0 decimals make sense?
Zero decimals makes a token that only exists in whole units, like tickets, votes or points where half a unit means nothing. It is a poor fit for anything that trades in a pool, since a swap almost never comes out to a whole number and the leftover is rounded away. One detail matters if you go this way: the Metaplex metadata program labels a zero-decimal token as a different kind of asset unless told otherwise, and some wallets may then not list it as a token at all. Our creator sets the standard to fungible explicitly, so a zero-decimal token still lists as a normal token.
Can I change decimals after creation?
No. Decimals are set when the mint account is initialized and no instruction in the token program can change them, with or without authority. If you picked the wrong value, the only fix is a new token. Check the review screen before you sign.
What is the maximum supply of a Solana token?
Every raw amount on Solana is an unsigned 64-bit integer, so no balance and no total supply can go above 18,446,744,073,709,551,615 base units. Your decimals eat into that ceiling: each extra decimal place divides the largest possible supply by ten.
| Decimals | Largest possible supply (whole tokens) |
|---|---|
| 0 | 18,446,744,073,709,551,615 |
| 2 | 184,467,440,737,095,516 |
| 6 | 18,446,744,073,709 |
| 9 | 18,446,744,073 |
| 12 | 18,446,744 |
| 18 | 18 |
With 9 decimals the cap is just over 18.4 billion tokens. With 6 it is about 18.4 trillion. Our form runs this exact check as you type: if supply times ten to the power of the decimals does not fit, it tells you the largest supply your decimals allow, so you never reach the wallet with a token that cannot be minted.
People sometimes search for "Solana max supply" meaning SOL itself. SOL has no fixed cap: new SOL is issued to stakers on a declining inflation schedule and part of every transaction fee is burned. That is a different question from your token's supply, which is entirely in your hands.
How to pick a supply
Supply on its own does not make a token cheap or valuable. What buyers see is the price per token, which comes from the pool: the amount of SOL you deposit divided by the amount of your token next to it. The supply mostly shapes how the numbers feel.
For a meme coin
Large round numbers are the norm, and 1,000,000,000 is the most familiar: it is the fixed supply of every pump.fun token. A big supply means a tiny price per token and lets buyers hold millions of them, which is part of the appeal. Keep the number round so the share of supply in the pool and in any team wallet is easy to read on an explorer.
For a utility or community token
A smaller supply, such as 10,000,000 or 100,000,000, keeps the price per token in a range people can reason about, which helps when tokens pay for something or count as votes. Work out how many tokens you need for rewards, the pool and the team before you create anything, because a fixed supply cannot be topped up later. Our tokenomics planning guide covers that split.
A quick sanity check
- Decide how much of the supply goes into the liquidity pool and how much you keep.
- Divide the SOL you plan to deposit by the tokens going into the pool. That is your starting price.
- Multiply that price by the full supply. That is the valuation buyers will see.
Can the supply change after creation?
It can grow only while someone holds the mint authority. That wallet can mint new tokens at any time, to any address, which is exactly why buyers check for it. Revoke the mint authority and the supply can never grow again. It can still shrink, because any holder can burn their own tokens.
Our creator lets you revoke mint authority in the same transaction that creates the token, for 0.04 SOL on top of the 0.1 SOL creation fee. Doing it at creation means there is never a moment when the token exists with an open mint. Our guide to the mint authority and the other two authorities explains when keeping one makes sense.
Where supply and decimals show up after launch
On an explorer
Paste the mint address into Solscan or Solana Explorer and the token page lists the current supply, the decimals, the mint authority and the freeze authority. Explorers already divide by the decimals, so the supply reads in whole tokens. If you revoked mint authority, the field is empty or marked as disabled.
On DEX Screener and similar sites
Market sites multiply the pool price by the supply to show a valuation. Fully diluted value uses the total supply; market cap may use a circulating figure that leaves out burned or locked tokens, depending on the site. A large supply with a tiny price can show the same valuation as a small supply with a high price, which is why supply alone says little about a token.
Why does my wallet show a different number?
Usually for one of three reasons. You are reading a raw amount somewhere (an API, a transaction log or a program account) and comparing it with a displayed balance. Part of the supply sits in the pool or another wallet, so your balance is lower than the total. Or the wallet has not refreshed the token yet, which a reload fixes. The decimals themselves do not drift: every app reads the same value from the mint.
Frequently asked questions
How many decimals should a Solana token have?
9 for most tokens, matching SOL. Use 6 if you need a supply above about 18.4 billion, and 0 only for tokens that must stay whole.
What is the maximum supply of a Solana token?
18,446,744,073,709,551,615 base units, divided by ten for every decimal place. That is about 18.4 billion whole tokens at 9 decimals.
Can I change the decimals later?
No. They are fixed when the token is created. A different value means a new token.
How many lamports are in one SOL?
1,000,000,000. A lamport is one billionth of a SOL.
Does a bigger supply make each token cheaper?
Only through the pool. The price per token is the ratio of SOL to tokens you deposit, so the same deposit spread over ten times the tokens gives a price ten times lower, and the same total valuation.
Set them once, set them right
Decimals are permanent and the supply is permanent once mint authority is gone, so decide both before you open the form. For most launches that means 9 decimals and a round supply you have already split between the pool and your own plans. When you are ready, create your token with logo and metadata in one transaction; the full walkthrough of every field is in our guide to create a Solana token, and what it costs is broken down line by line.