20lab alternative: Solana token fees compared with solanatokencreator.app

20lab is a multi-chain token generator that also makes SPL tokens. Its Solana service fee is $59, shown converted to SOL at the deploy step: 0.82644 SOL when we checked, so the SOL amount moves with the price. Its revoke and pool fees were not shown, so those rows are marked as not published.

We built this site, so we are not neutral. Every competitor fact comes from its own site, docs or app, listed under Sources, and anything they do not publish is marked as such. Last checked .

20lab vs solanatokencreator.app: the short answer

  • Plain token: solanatokencreator.app is cheaper, 0.1 SOL against 0.8264 SOL on 20lab.
  • Token with mint and freeze revoked: cannot be compared, because 20lab does not publish one of the fees in this total.
  • Token with all three authorities revoked: cannot be compared, because 20lab does not publish one of the fees in this total.
  • Token-2022 tax token (service fee only): cannot be compared, because 20lab does not publish a tax token fee.
  • Liquidity pool service fee: cannot be compared, because 20lab does not publish a pool creation fee.

Service fees only, in SOL. Network rent and DEX costs are the same on both sides and are covered below.

20lab vs solanatokencreator.app: fees side by side

Service fees in SOL as each side publishes them. Every 20lab value comes from its own site or app; the pages are listed under Sources.

Fees: 20lab compared with solanatokencreator.app
Fee or featuresolanatokencreator.appOurs20labChecked
Create a tokenService fee0.1 SOL0.82644 SOLSeen in their app: a $59 service fee shown in SOL at the deploy step, so the SOL amount moves with the price
Revoke mint authority+0.04 SOLAt creationNot published on their site
Revoke freeze authority+0.04 SOLAt creationNot published on their site
Revoke update authority+0.04 SOLAt creationNot published on their site
Revokes in the creation stepYes, only at creationNo separate revoke toolNot published on their site
Tax token (Token-2022)0.1 SOLTransfer fee up to 10%; revokes extraNot published on their siteA transfer tax option is mentioned; fee not stated
Create a liquidity poolService fee; DEX costs extra0.05 SOLNot published on their site
Pool typesRaydium CPMM and Meteora DAMM v2Raydium and Meteora are mentioned
Add or remove liquidityService fee per action0.05 SOLNot published on their site
Burn LP0.05 SOLLock or burn an existing pool's LPNot published on their site
Lock LPFreeAt pool creation, permanent; 0.05 SOL for an existing poolNot published on their site
CustodyNon-custodial: you sign in your own wallet, no accountNot published on their site
ChainsSolana onlySolana, Sui and many EVM chains
Total: token + mint and freeze revokedService fees only0.18 SOLCannot be totalledAn input is not published or not offered
Total: token + all three revokedService fees only0.22 SOLCannot be totalledAn input is not published or not offered
  • A token + mint and freeze revoked: 0.18 SOL on solanatokencreator.app. On 20lab this cannot be totalled, because one of the fees is not published.
  • A token + all three revoked: 0.22 SOL on solanatokencreator.app. On 20lab this cannot be totalled, because one of the fees is not published.

These are service fees only. Rent and the Metaplex metadata fee, about 0.0163 SOL for a classic token, go to the network whichever tool you use. So do the DEX's own pool costs: about 0.182 SOL for Raydium CPMM and about 0.017 SOL for Meteora DAMM v2. Every fee we charge is on the fees page.

20lab pool costs, with Raydium CPMM and Meteora DAMM v2 fees

A new pool costs two things: the tool's service fee and the DEX's own cost. The DEX part is the same whichever tool you use: Raydium CPMM takes 0.15 SOL creation fee + ~0.03 SOL rent (about 0.182 SOL), and Meteora DAMM v2 takes ~0.017 SOL rent, no pool creation fee.

  • Raydium CPMM on solanatokencreator.app: 0.05 SOL service fee, about 0.232 SOL in all.
  • Meteora DAMM v2 on solanatokencreator.app: 0.05 SOL service fee, about 0.067 SOL in all.
  • On 20lab: a pool creation fee is not published, so a total cannot be worked out. Pool types it lists: Raydium and Meteora are mentioned.

Meteora DAMM v2 has no pool creation fee, so it is the cheaper DEX to open on; Raydium CPMM CPMM needs no OpenBook market and is the pool most traders find first. The Raydium pool types guide and how much liquidity to add help you pick, and lock or burn LP explains what to do with the LP afterwards.

Where 20lab is better

  • Many chains

    20lab lists Ethereum, BNB Smart Chain, Base, Arbitrum and many more EVM chains, plus Solana and Sui. We only do Solana.

  • Free on devnet and testnet

    Its Solana page says creating SPL tokens on devnet and testnet is free. Our site is mainnet only.

  • A fee fixed in dollars

    Its service fee is $59 whatever SOL is worth, which makes it easy to budget in dollars. Ours is fixed in SOL, so its dollar value moves with the price.

  • Owner dashboard after launch

    Its FAQ says you manage the token from an owner dashboard afterwards, including minting, freezing accounts, updating metadata and revoking authorities. Here revokes happen only at creation.

What solanatokencreator.app does not do

  • Two pool types only

    New pools are Raydium CPMM or Meteora DAMM v2. No Raydium CLMM or AMM v4, no Meteora DLMM, no Orca, and no OpenBook markets.

  • Revokes only at creation

    Mint, freeze and update authority can be revoked in the creation step. There is no separate tool for revoking on a token that already exists.

  • A small tool set

    Token, tax token, pool, add and remove liquidity, LP lock and burn. No vesting, multisender, airdrops, volume or market-making bots, or token management after launch.

  • Solana only, permanent locks only

    No other chains. LP locks are permanent; there is no timed lock that unlocks on a date. Tax tokens use the Token-2022 transfer fee up to 10%, with no other extensions.

Where solanatokencreator.app is better than 20lab

  • Lower token fee

    0.1 SOL for a token against 0.82644 SOL on 20lab when we checked. Even with all three authorities revoked, our fees come to 0.22 SOL.

  • Every fee shown before you connect

    Token 0.1 SOL, each revoke 0.04 SOL, pool 0.05 SOL, listed on our fees page and again on the review step. 20lab's revoke and tax token fees were not shown.

  • Pools built here, not just a guide

    20lab's page points you to Raydium and Meteora to add liquidity. Our pool creator opens Raydium CPMM or Meteora DAMM v2 pools for 0.05 SOL.

  • A tax token at the regular price

    A Token-2022 transfer-fee token costs 0.1 SOL, the same as a classic token, with a rate of up to 10% and an optional per-transfer cap. Locking the rate is free.

  • LP lock included at pool creation

    Lock LP switches on in the pool creator at no extra fee from us. For a pool that already exists, locking or burning LP is 0.05 SOL.

  • No account, no token to hold

    Connect a wallet and sign. The fee is part of the same transaction as the action, so a failed transaction does not charge it.

20lab or solanatokencreator.app: which to choose

Choose 20lab if you need tokens on EVM chains or Sui as well, want a free dry run on Solana devnet first, or prefer a fee fixed in dollars.

Choose solanatokencreator.app if you want a lower Solana token fee, every price known before connecting a wallet, and a Raydium CPMM or Meteora DAMM v2 pool with its LP locked on the same site.

How to switch from 20lab to solanatokencreator.app

A token made with 20lab is a standard Solana token, so it works with our pool creator, add and remove liquidity and Burn LP.

  1. New token: open the Solana token creator or the Token-2022 tax token creator, fill in name, symbol, supply and logo, and tick the authorities to revoke. The authorities guide explains each one.
  2. Existing 20lab token: skip the creator and paste its mint address into create a liquidity pool.
  3. Existing pool: paste its pool address into add liquidity, remove liquidity or lock or burn LP.
  4. Check the review step: every fee is itemised before your wallet opens, and the fee is part of the same transaction, so a failed transaction does not charge it.

New to launching? Read how to create a Solana token, what a Solana token costs in total and what to do after launch, or see every tool on the Solana token creator comparison.

20lab alternative: questions

How much does 20lab charge to create a Solana token?

A $59 service fee, shown in SOL at the deploy step (0.82644 SOL when we checked), plus network costs. On solanatokencreator.app the fee is 0.1 SOL, shown on the review step.

Why does 20lab's SOL price change?

Its fee is set in dollars and converted to SOL when you deploy, so it rises when SOL falls and falls when SOL rises. Our fee is set in SOL and does not move.

What is the cheapest 20lab alternative on Solana?

solanatokencreator.app charges 0.1 SOL for a plain token. The Solana token creator comparison lists every tool we checked, cheapest first, for plain tokens and tokens with revokes.

Can 20lab create a Solana tax token?

Its pages mention a transfer tax option for Solana; the fee is not published on their site. Our Tax Token Creator costs 0.1 SOL with a rate of up to 10%.

Does 20lab create liquidity pools?

Its SPL page guides you to add liquidity on Raydium and links a Meteora guide. On solanatokencreator.app the pool creator opens Raydium CPMM and Meteora DAMM v2 pools directly.

Sources for the 20lab figures

20lab

  • 20lab.app/generate/spl-token, checked
  • 20lab.app, checked

Our own prices come from the same settings our tools charge, listed on the fees page. Names are trademarks of their owners; we are not affiliated with any of them. Found something wrong or out of date? Tell us through support and we will check and correct it within 48 hours.

Create your token

Flat fees in SOL, shown in full on the review step before your wallet opens.