Mintcraft alternative: Solana token fees compared with solanatokencreator.app

Mintcraft is a Solana token and liquidity site with a wide range of pool types and launch tools. Tokens start "from 0.2 SOL", and its creation form offers mint and freeze revokes at 0.1 SOL each. Update authority cannot be revoked in the creation form; its pool and LP tools are priced per action inside the app.

We built this site, so we are not neutral. Every competitor fact comes from its own site, docs or app, listed under Sources, and anything they do not publish is marked as such. Last checked .

Mintcraft vs solanatokencreator.app: the short answer

  • Plain token: solanatokencreator.app is cheaper, 0.1 SOL against 0.2 SOL on Mintcraft.
  • Token with mint and freeze revoked: solanatokencreator.app is cheaper, 0.18 SOL against 0.4 SOL on Mintcraft.
  • Token with all three authorities revoked: cannot be compared, because Mintcraft does not offer an update revoke at creation.
  • Token-2022 tax token (service fee only): cannot be compared, because Mintcraft does not publish a tax token fee.
  • Liquidity pool service fee: cannot be compared, because Mintcraft does not publish a pool creation fee.

Service fees only, in SOL. Network rent and DEX costs are the same on both sides and are covered below.

Mintcraft vs solanatokencreator.app: fees side by side

Service fees in SOL as each side publishes them. Every Mintcraft value comes from its own site or app; the pages are listed under Sources.

Fees: Mintcraft compared with solanatokencreator.app
Fee or featuresolanatokencreator.appOursMintcraftChecked
Create a tokenService fee0.1 SOL0.2 SOL"From 0.2 SOL, plus Solana network fees"
Revoke mint authority+0.04 SOLAt creation0.1 SOLSeen in their app: 0.10 SOL, discounted from 0.20
Revoke freeze authority+0.04 SOLAt creation0.1 SOLSeen in their app: 0.10 SOL, discounted from 0.20
Revoke update authority+0.04 SOLAt creationNot offeredNot at creation; a separate Revoke Update tool exists
Revokes in the creation stepYes, only at creationNo separate revoke toolMint and freeze only
Tax token (Token-2022)0.1 SOLTransfer fee up to 10%; revokes extraNot published on their siteToken-2022 tokens offered; fee not stated
Create a liquidity poolService fee; DEX costs extra0.05 SOLNot published on their sitePriced per action, shown before you confirm
Pool typesRaydium CPMM and Meteora DAMM v2Raydium CPMM and CLMM, Meteora DAMM v2 and DLMM
Add or remove liquidityService fee per action0.05 SOLNot published on their sitePriced per action, shown before you confirm
Burn LP0.05 SOLLock or burn an existing pool's LPNot published on their siteOffered; priced per action, shown before you confirm
Lock LPFreeAt pool creation, permanent; 0.05 SOL for an existing poolNot published on their siteTime-locked LP lock offered; priced per action, shown before you confirm
CustodyNon-custodial: you sign in your own wallet, no account"We never touch your private keys"
ChainsSolana onlyNot published on their site
Total: token + mint and freeze revokedService fees only0.18 SOL0.4 SOL
Total: token + all three revokedService fees only0.22 SOLCannot be totalledAn input is not published or not offered
  • A token + mint and freeze revoked: 0.18 SOL on solanatokencreator.app. 0.4 SOL on Mintcraft.
  • A token + all three revoked: 0.22 SOL on solanatokencreator.app. On Mintcraft this cannot be totalled, because one of these revokes is not offered at creation.

These are service fees only. Rent and the Metaplex metadata fee, about 0.0163 SOL for a classic token, go to the network whichever tool you use. So do the DEX's own pool costs: about 0.182 SOL for Raydium CPMM and about 0.017 SOL for Meteora DAMM v2. Every fee we charge is on the fees page.

Mintcraft pool costs, with Raydium CPMM and Meteora DAMM v2 fees

A new pool costs two things: the tool's service fee and the DEX's own cost. The DEX part is the same whichever tool you use: Raydium CPMM takes 0.15 SOL creation fee + ~0.03 SOL rent (about 0.182 SOL), and Meteora DAMM v2 takes ~0.017 SOL rent, no pool creation fee.

  • Raydium CPMM on solanatokencreator.app: 0.05 SOL service fee, about 0.232 SOL in all.
  • Meteora DAMM v2 on solanatokencreator.app: 0.05 SOL service fee, about 0.067 SOL in all.
  • On Mintcraft: a pool creation fee is not published, so a total cannot be worked out. Pool types it lists: Raydium CPMM and CLMM, Meteora DAMM v2 and DLMM.

Meteora DAMM v2 has no pool creation fee, so it is the cheaper DEX to open on; Raydium CPMM CPMM needs no OpenBook market and is the pool most traders find first. The Raydium pool types guide and how much liquidity to add help you pick, and lock or burn LP explains what to do with the LP afterwards.

Where Mintcraft is better

  • Four pool types

    Raydium CPMM and CLMM, Meteora DAMM v2 and DLMM. We open Raydium CPMM and Meteora DAMM v2 only.

  • Timed LP locks

    Liquidity can be locked until a date you set. Our locks are permanent only.

  • Vesting, multisender and airdrops

    Cliff and linear vesting schedules, bulk sends and an airdrop claim site. We offer none of these.

  • Revoke tools for existing tokens

    Separate Revoke Mint, Revoke Freeze and Revoke Update tools work on a token after launch. Here revokes happen only at creation.

  • Token management after launch

    Mint, burn, freeze and update metadata on existing tokens. We have no tools for a token after launch.

What solanatokencreator.app does not do

  • Two pool types only

    New pools are Raydium CPMM or Meteora DAMM v2. No Raydium CLMM or AMM v4, no Meteora DLMM, no Orca, and no OpenBook markets.

  • Revokes only at creation

    Mint, freeze and update authority can be revoked in the creation step. There is no separate tool for revoking on a token that already exists.

  • A small tool set

    Token, tax token, pool, add and remove liquidity, LP lock and burn. No vesting, multisender, airdrops, volume or market-making bots, or token management after launch.

  • Solana only, permanent locks only

    No other chains. LP locks are permanent; there is no timed lock that unlocks on a date. Tax tokens use the Token-2022 transfer fee up to 10%, with no other extensions.

Where solanatokencreator.app is better than Mintcraft

  • Lower token and revoke fees

    0.1 SOL to create against 0.2 SOL, and 0.04 SOL per revoke against 0.1 SOL. With mint and freeze revoked: 0.18 SOL here, 0.4 SOL on Mintcraft.

  • Pool and LP prices published

    Pool 0.05 SOL, add or remove liquidity 0.05 SOL, lock or burn 0.05 SOL, all on our fees page before you connect. Mintcraft shows these per action before you confirm.

  • All three revokes in one step

    Mint, freeze and update in the same transaction as the token, 0.22 SOL in all. Mintcraft's creation form does not offer the update revoke; it is a separate tool.

  • A tax token at the regular price

    A Token-2022 transfer-fee token costs 0.1 SOL, the same as a classic token, with a rate of up to 10% and an optional per-transfer cap. Locking the rate is free.

  • LP lock included at pool creation

    Lock LP switches on in the pool creator at no extra fee from us. For a pool that already exists, locking or burning LP is 0.05 SOL.

  • First buys in the same bundle

    An optional bundled first buy, from your wallet or up to 24 extra wallets, for 0.05 SOL, charged only if the buys land.

Mintcraft or solanatokencreator.app: which to choose

Choose Mintcraft if you need a CLMM or DLMM pool, a lock that ends on a date, vesting, a multisender, or tools to revoke or manage a token after launch.

Choose solanatokencreator.app if you want lower fees for a token with revokes, all three revokes at creation, a Token-2022 tax token with a published price, and a Raydium CPMM or Meteora DAMM v2 pool with a permanent LP lock in the same step.

How to switch from Mintcraft to solanatokencreator.app

Tokens made on Mintcraft are standard Solana tokens, so our pool creator, liquidity tools and Burn LP accept them by address.

  1. New token: open the Solana token creator or the Token-2022 tax token creator, fill in name, symbol, supply and logo, and tick the authorities to revoke. The authorities guide explains each one.
  2. Existing Mintcraft token: skip the creator and paste its mint address into create a liquidity pool.
  3. Existing pool: paste its pool address into add liquidity, remove liquidity or lock or burn LP.
  4. Check the review step: every fee is itemised before your wallet opens, and the fee is part of the same transaction, so a failed transaction does not charge it.

New to launching? Read how to create a Solana token, what a Solana token costs in total and what to do after launch, or see every tool on the Solana token creator comparison.

Mintcraft alternative: questions

Is Mintcraft cheaper than solanatokencreator.app?

Not for creating a token: 0.2 SOL plus 0.1 SOL per revoke on Mintcraft, 0.1 SOL plus 0.04 SOL here. Its pool and LP fees are shown per action in the app, so those cannot be compared from its site.

Can I revoke update authority on Mintcraft?

Not in its creation form, which offers mint and freeze only. A separate Revoke Update tool exists; its fee was not shown. On solanatokencreator.app update authority is revoked at creation for 0.04 SOL.

Can Mintcraft lock liquidity for a set time?

Yes, its site offers time-locked liquidity. Our locks are permanent: free at pool creation, 0.05 SOL for an existing pool.

Which pool types does each support?

Mintcraft lists Raydium CPMM and CLMM and Meteora DAMM v2 and DLMM. We open Raydium CPMM and Meteora DAMM v2; our add and remove liquidity tools also work with Raydium AMM v4 and CLMM pools.

Sources for the Mintcraft figures

Mintcraft

  • mintcraft.io, checked
  • mintcraft.io/solana/create-spl-token, checked

Our own prices come from the same settings our tools charge, listed on the fees page. Names are trademarks of their owners; we are not affiliated with any of them. Found something wrong or out of date? Tell us through support and we will check and correct it within 48 hours.

Create your token

Flat fees in SOL, shown in full on the review step before your wallet opens.