Orion Tools alternative: Solana token and pool fees compared with solanatokencreator.app

Orion Tools is a Solana token and liquidity site. Its base creation fee is 0.3 SOL, and its form adds a required freeze revoke of 0.1 SOL, so the total it shows is 0.4 SOL. Pools are 0.5 SOL. Below, every fee is set against ours, with the page where Orion shows it listed under Sources.

We built this site, so we are not neutral. Every competitor fact comes from its own site, docs or app, listed under Sources, and anything they do not publish is marked as such. Last checked .

Orion Tools vs solanatokencreator.app: the short answer

  • Plain token: solanatokencreator.app is cheaper, 0.1 SOL against 0.4 SOL on Orion Tools (with the freeze revoke Orion Tools requires).
  • Token with mint and freeze revoked: solanatokencreator.app is cheaper, 0.18 SOL against 0.5 SOL on Orion Tools.
  • Token with all three authorities revoked: cannot be compared, because Orion Tools does not publish one of the fees in this total.
  • Token-2022 tax token (service fee only): cannot be compared, because Orion Tools does not publish a tax token fee.
  • Raydium CPMM pool, including the DEX's own cost: solanatokencreator.app is cheaper, 0.232 SOL against 0.682 SOL on Orion Tools.

Service fees only, in SOL. Network rent and DEX costs are the same on both sides and are covered below.

Orion Tools vs solanatokencreator.app: fees side by side

Service fees in SOL as each side publishes them. Every Orion Tools value comes from its own site or app; the pages are listed under Sources.

Fees: Orion Tools compared with solanatokencreator.app
Fee or featuresolanatokencreator.appOursOrion ToolsChecked
Create a tokenService fee0.1 SOL0.3 SOLTheir form totals "0.40 SOL" with the required freeze revoke (0.1 SOL)
Revoke mint authority+0.04 SOLAt creation0.1 SOL
Revoke freeze authority+0.04 SOLAt creation0.1 SOLRequired before creating a pool
Revoke update authority+0.04 SOLAt creationNot published on their site
Revokes in the creation stepYes, only at creationNo separate revoke toolYes; revoking freeze is required
Tax token (Token-2022)0.1 SOLTransfer fee up to 10%; revokes extraNot published on their site
Create a liquidity poolService fee; DEX costs extra0.05 SOL0.5 SOLTheir pool page: "The cost to create a liquidity pool is .5 SOL"
Pool typesRaydium CPMM and Meteora DAMM v2Raydium CPMM and AMM v4
Add or remove liquidityService fee per action0.05 SOL0.1 SOLSeen in their app: remove liquidity; an add fee was not shown
Burn LP0.05 SOLLock or burn an existing pool's LPNot published on their siteTheir pool page suggests burning LP tokens; a Burn & Earn page exists; fee not stated
Lock LPFreeAt pool creation, permanent; 0.05 SOL for an existing poolNot published on their site
CustodyNon-custodial: you sign in your own wallet, no accountNot published on their site
ChainsSolana onlySolana only
Total: token + mint and freeze revokedService fees only0.18 SOL0.5 SOL
Total: token + all three revokedService fees only0.22 SOLCannot be totalledAn input is not published or not offered
  • A token + mint and freeze revoked: 0.18 SOL on solanatokencreator.app. 0.5 SOL on Orion Tools.
  • A token + all three revoked: 0.22 SOL on solanatokencreator.app. On Orion Tools this cannot be totalled, because one of the fees is not published.

These are service fees only. Rent and the Metaplex metadata fee, about 0.0163 SOL for a classic token, go to the network whichever tool you use. So do the DEX's own pool costs: about 0.182 SOL for Raydium CPMM and about 0.017 SOL for Meteora DAMM v2. Every fee we charge is on the fees page.

Orion Tools pool costs, with Raydium CPMM and Meteora DAMM v2 fees

A new pool costs two things: the tool's service fee and the DEX's own cost. The DEX part is the same whichever tool you use: Raydium CPMM takes 0.15 SOL creation fee + ~0.03 SOL rent (about 0.182 SOL), and Meteora DAMM v2 takes ~0.017 SOL rent, no pool creation fee.

  • Raydium CPMM on solanatokencreator.app: 0.05 SOL service fee, about 0.232 SOL in all.
  • Meteora DAMM v2 on solanatokencreator.app: 0.05 SOL service fee, about 0.067 SOL in all.
  • On Orion Tools: 0.5 SOL service fee, about 0.682 SOL in all for a Raydium CPMM pool. Pool types it lists: Raydium CPMM and AMM v4.

Meteora DAMM v2 has no pool creation fee, so it is the cheaper DEX to open on; Raydium CPMM CPMM needs no OpenBook market and is the pool most traders find first. The Raydium pool types guide and how much liquidity to add help you pick, and lock or burn LP explains what to do with the LP afterwards.

Where Orion Tools is better

  • Raydium AMM v4 pools

    Its liquidity page lists CPMM and AMM v4 pools. We open CPMM on Raydium and DAMM v2 on Meteora, not AMM v4.

  • One total on the form

    The form shows the full price for the options you pick (0.4 SOL with the required freeze revoke), so there is one number to check before you sign.

  • Mint more supply later

    A Mint Token option adds supply to an existing token for 0.1 SOL. We do not offer minting after creation.

  • Swap and token burn tools

    Swap, Burn Token and Burn & Earn pages sit beside the creator. We have no swap or token burn tool.

What solanatokencreator.app does not do

  • Two pool types only

    New pools are Raydium CPMM or Meteora DAMM v2. No Raydium CLMM or AMM v4, no Meteora DLMM, no Orca, and no OpenBook markets.

  • Revokes only at creation

    Mint, freeze and update authority can be revoked in the creation step. There is no separate tool for revoking on a token that already exists.

  • A small tool set

    Token, tax token, pool, add and remove liquidity, LP lock and burn. No vesting, multisender, airdrops, volume or market-making bots, or token management after launch.

  • Solana only, permanent locks only

    No other chains. LP locks are permanent; there is no timed lock that unlocks on a date. Tax tokens use the Token-2022 transfer fee up to 10%, with no other extensions.

Where solanatokencreator.app is better than Orion Tools

  • Lower token fee, freeze revoke optional

    0.1 SOL to create against Orion's 0.3 SOL. Revoking freeze is your choice here; on Orion it is required, which brings its form total to 0.4 SOL.

  • Cheap revokes, in the same step

    0.04 SOL per authority here against 0.1 SOL for mint and 0.1 SOL for freeze on Orion. With both revoked: 0.18 SOL against 0.5 SOL. Update authority can be revoked here too; we did not see that option on Orion's form.

  • Lower pool and liquidity fees

    A pool is 0.05 SOL here against 0.5 SOL on Orion. Removing liquidity is 0.05 SOL here against 0.1 SOL on Orion.

  • A tax token at the regular price

    A Token-2022 transfer-fee token costs 0.1 SOL, the same as a classic token, with a rate of up to 10% and an optional per-transfer cap. Locking the rate is free.

  • Meteora DAMM v2 next to Raydium CPMM

    Our pool creator opens Raydium CPMM or Meteora DAMM v2 pools for 0.05 SOL. Meteora DAMM v2 has no DEX creation fee and can open in the same block as a first buy.

  • LP lock included at pool creation

    Lock LP switches on in the pool creator at no extra fee from us. For a pool that already exists, locking or burning LP is 0.05 SOL.

Orion Tools or solanatokencreator.app: which to choose

Choose Orion Tools if you want a Raydium AMM v4 pool, one total on the form, the option to mint more supply later, or a swap and token burn tool on the same site.

Choose solanatokencreator.app if you want lower token, revoke and pool fees, the choice to keep freeze authority, an update revoke, a tax token, or a Meteora DAMM v2 pool with an LP lock in the same step.

How to switch from Orion Tools to solanatokencreator.app

A token from Orion Tools is a standard SPL token, so it works with every liquidity tool here: its mint address goes into the pool creator, its pool address into the liquidity and LP tools.

  1. New token: open the Solana token creator or the Token-2022 tax token creator, fill in name, symbol, supply and logo, and tick the authorities to revoke. The authorities guide explains each one.
  2. Existing Orion Tools token: skip the creator and paste its mint address into create a liquidity pool.
  3. Existing pool: paste its pool address into add liquidity, remove liquidity or lock or burn LP.
  4. Check the review step: every fee is itemised before your wallet opens, and the fee is part of the same transaction, so a failed transaction does not charge it.

New to launching? Read how to create a Solana token, what a Solana token costs in total and what to do after launch, or see every tool on the Solana token creator comparison.

Orion Tools alternative: questions

How much does Orion Tools charge to create a Solana token?

The base fee is 0.3 SOL. Revoking freeze authority (0.1 SOL) is required, so its form shows 0.4 SOL; revoking mint adds 0.1 SOL. On solanatokencreator.app a token is 0.1 SOL and each revoke 0.04 SOL, all optional.

What is the cheapest Orion Tools alternative for a token with revokes?

Among the tools we compare, a token with mint and freeze revoked is 0.18 SOL on solanatokencreator.app against 0.5 SOL on Orion. The roundup page totals every tool for the same launch.

How much does Orion Tools charge to create a liquidity pool?

0.5 SOL for a Raydium CPMM or AMM v4 pool, plus Raydium's own cost. Ours is 0.05 SOL for Raydium CPMM or Meteora DAMM v2, plus the DEX's cost.

Which pool types can each create?

Orion's liquidity page lists Raydium CPMM and AMM v4. solanatokencreator.app opens Raydium CPMM and Meteora DAMM v2.

Can I lock liquidity on Orion Tools?

Orion's page suggests burning LP tokens; its LP fee is not published. Here you can lock LP for free when creating the pool, or lock or burn it later for 0.05 SOL. Locking keeps your share of trading fees; burning gives it up.

Sources for the Orion Tools figures

Orion Tools

  • oriontools.io, checked
  • oriontools.io/create-liquidity, checked

Our own prices come from the same settings our tools charge, listed on the fees page. Names are trademarks of their owners; we are not affiliated with any of them. Found something wrong or out of date? Tell us through support and we will check and correct it within 48 hours.

Create your token

Flat fees in SOL, shown in full on the review step before your wallet opens.